产品描述
不建议在热车状态下查看机油标尺。因为发动机运行时，流动于各零部件之间的机油还没有回流到油底壳，所以会导致机油标尺显示的液面位置偏低。
相比之下，冷车时机油基本都聚集在油底壳里，各零部件之间和管道里残留的机油较少，虽然这时查看的机油位置会偏高，但是准确度更高。
免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.
公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。
联系人：梁经理
联系方式：13645201509
（微信同号）
QQ：2870202745
QQ邮箱：2870202745@qq.com
网易邮箱：LS13645201509@163.com
WhatsApp:+86 13645201509
It is not recommended to check the oil dipstick while the car is hot. Because the oil flowing between various components during engine operation has not yet returned to the oil pan, it can cause the oil level displayed on the dipstick to be low.
In contrast, when the car is cold, the oil basically accumulates in the oil pan, and there is less residual oil between various components and in the pipes. Although the oil level checked at this time may be higher, the accuracy is higher.
Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it
Company Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.
Contact: Manager Liang
Contact information: 13645201509
(Same WeChat account)
QQ：2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
WhatsApp:+86 13645201509
您的专属咨询顾问：张经理
咨询电话：13705213256
地址：徐州市泉山区段庄街道矿山路百合嘉园
备案号：05039780